Usually fixes directly to the body of the luminaire via a 20mm bush and locknut. Normally issued to the luminaire manufacturer for pre-wiring, preventing time consuming installation on site.

Wired via flexible cable where mechanical fixing is not possible eg: down lights. Can be provided with a female plug connector in instances where the luminaire is supplied with a male connector.

Supplied as standard with a 4 pole plug, this ‘t’ piece allows quick connection to a 230v eco₂sensor^TM PIR.

Only use this ‘t’ piece when a PIR is at the start of a circuit, not suitable for daisy chaining.

Supplied as standard with a 4 pole plug, this ‘t’ piece allows quick connection to a 230v eco₂sensor^TM PIR.

Only use this ‘t’ piece when a number of PIR’s are to be daisy chained in order to switch a large area. Use only in conjunction with a local switch module.

Incorporates a multicore switch drop to enable all fittings to be controlled by that switch position. Any conventional switching configuration can be achieved such as key or intermediate for example.

Incorporates a key switch drop to enable emergency luminaire testing.

Incorporates a normal switch drop and a key switch drop to enable local switching and emergency luminaire testing.

Incorporates a multicore switch drop to enable 2 way switching. Use in conjunction with a 2 way switch module.

6 pole ‘t’ piece to provide power and bus to LCM’s.